Migrating an ESXi Host running vCenter to a Distributed vSwitch

We have tried our lab environment introduce vSphere Distributed Switch. We installed two ESXi host, (x.0.7 and x.0.4) and created one vCenter Server Appliance, that ran one ESXi. We created a distributed switch, than portgroups. Both of them ESXi host had 3 NIC, vmnic0 to Management, vmnic1 to vMotion and vmnic2 to iSCSI. The vCenter Server Appliance ran on x.0.4 host. First we assigned vMotion and iSCSI network to phisycal nics each hosts. That was right. The problem began when we tried to migrate from standard vSwitch to dist. vSwitch the managament network. vCenter Applicance always rollbacked the networks. We recognized the problem, after a few minutes. Becouse we had one uplink to vSwitch and dSwitch, the vCenter always disconnected from network, and wasn’t able to connect management network. Fortunetly we found solution ours problem.

Solution: https://www.youtube.com/watch?v=9A_9svZCovs and http://wahlnetwork.com/2013/11/22/migrating-esxi-host-running-vcenter-distributed-vswitch/

Moving a managed ESXi/ESX host from one vCenter Server to another vCenter Server

In our environment, we have 3 datacenters. The legacy consist of IBM blade servers with virtual vCenter, and the new consist of Cisco UCS blade servers, with other vCenter. This is virtual same. We guessed that insert IBM servers into vCenter of Cisco servers. I found a vmware KB articel. This is very easy procedure, if they aren’t use vDS.